|
Order Code
|
Topic
|
Applicable Standards
|
Dispatch Date
|
Results Due
|
Additional Information
|
$AUD (ex GST)
|
|
09e38
|
Temperature Rise, Switch Mode Power Supply
|
IEC 60950, IEC 60065, IEC 61558
|
22nd February 2010
|
5th April 2010
|
One Switch Mode Power Supply unit to be tested at two specified
input conditions using thermocouples in specified locations. Following
this, participants will be requested to test the units in accordance with
their standards, reporting the temperature rise applicable to the
particular standard.
|
$500
|
|
10e39A
|
RoHS, regulated substances
|
IEC 62321
|
28th February 2010
|
12th April 2010
|
Two samples of solder, two samples of ceramic material to be
tested for levels of: Lead,
Cadmium, Mercury, and Chromium VI.
|
$570
|
|
09e31
|
Tracking Test
|
IEC 60112, applicable to all product standards where the test is
called up.
|
29th March 2010
|
30th of each month
|
This program is "check sample" (CSP) format.
Six short rounds will be conducted at monthly intervals. Each round
involves performing 2 tracking tests at specified voltages where tracking
(including number of drops to tracking), ignition, and depth of erosion
are reported). Each round
report will be issued within 10 working days of the due date, allowing
participants to gauge their performance before the next round. The final
report summarises all rounds.
|
$450
|
|
09e37
|
Working Voltage
|
IEC 60335-1, IEC 60950-1, IEC 60065
|
5th April 2010
|
17th May 2010
|
One "Black Box" to be sent for determination of Working
Voltage under specified standard conditions.
In addition, opportunities will be provided for normal voltage
measurements to be made for calibration checks.
|
$500
|
|
09e35
|
Cables, conductor resistance
|
IEC 60227
|
20th September 2010
|
31st October 2010
|
Two samples of standard appliance cables to be sent for
determination of conductor resistance
|
$570
|
|
10e39B
|
RoHS regulated substances
|
IEC 62321
|
To be advised
|
To be advised
|
Samples of plastic to be tested for polybrominated biphenyls,
polybrominated diphenyl ethers
|
To be advised
|
|
10e40
|
EMC
|
To be advised
|
To be advised
|
To be advised
|
To be advised
|
To be advised
|
|
05e22
|
Photovoltaics
|
IEC 61215 (2nd Edition)
|
Variable, samples are shared between many laboratories
|
3 weeks from receipt date
|
One solar panel for performance/safety tests and one resistor box
(for high voltage test to 3000V) will be sent
|
$500 plus shipping costs. Each
participant must send the sample by airfreight to the next laboratory
|
|
05e21
|
Laser
|
IEC 60825-1 and -2
|
Variable, samples are shared between many laboratories
|
3 weeks from receipt date
|
One line laser unit will be sent for basic energy measurements
|
$570
|
|
|
Date is tentative
|
|
|
|
|
|
A
|
The program will be issued to all
test laboratories at the same time. Samples do not need to be returned
|
|
B
|
The design of the program is as a
measurement program. Participants will be split into smaller groups and
will each test one or more samples. After testing, the samples are to be
returned so that they can be shipped to the next laboratory.
|
|
Purpose of program
|
For IECEE CB test laboratories:
This program will be compulsory for laboratories enrolled in the IECEE CB
scheme if they have not participated in this topic within the previous 3
years. Enrollment preference will be given to IECEE CB test laboratories.
However any other laboratory may join the program.
|
|
|
Directed to manufacturing
laboratories: The program is intended for laboratories associated with
manufacturers. The program design will be similar to one that has
previously been operated for CB test laboratories. Any laboratory may
join.
|
|
|
Designed for Independent test
laboratories: The program has been requested by a group of independent
laboratories, and is supported by this group. The program is open to any
laboratory wishing to participate.
|
